Hey Tony - didn't see your message but I was good. Thanks.
It's almost mobile again. The front is back together and ready to go
REMAINING LIST:1. Rear shock mounts need welded on
(ONE DONE)2. Install remaining shocks
(ALL BUT ONE DONE)
3. Add/change gear oil in rear differential
4. Make sure brake lines are not too short during flex. there is room to move the hard lines on the frame down to give more length. the drivers side you can move the hard line from on top of the shock mount to the shorter side of it.
4a. Replace broken hard brake line
(DONE)
5. Bleed brakes.
(DONE)6. Clean and paint all bare metal.